Bezpečnost a zabezpečení/Kamery/Venkovní kamery

SmartLife Venkovní Kamera

Wi-Fi | Full HD 1080p | Náklon | IP65 | Cloudové Úložiště (volitelně) / Interní 16 GB | 12 V DC | Se snímačem pohybu | Noční vidění | Bílá

Vlastnosti

Prod. kód prodejce: WIFICO20CWT
EAN: 5412810290062
• Chytrá Venkovní IP Kamera - poskytuje snadno instalovatelný a bezdrátově připojený bezpečnostní systém pro venkovní oblasti Vašeho majetku.
• Full HD rozlišení - pro nahrávání křišťálově čistého záznamu
• Snadné připojení přímo k Vaší síti Wi-Fi - není vyžadován žádný samostatný adaptér
• Dodává se s držákem
• Plně podporována všemi ostatními produkty řady Nedis® SmartLife.
Domácí automatizace je opět o něco jednodušší. Tuto snadno ovladatelnou Chytrou Venkovní IP Kameru lze jednoduše připojit k Wi-Fi síti za účelem sledování venkovních oblastí Vašeho domu a záznamu jakéhokoliv zvuku a pohybu.

Full HD Rozlišení
Aby dosáhla naprosto čistého obrazu, pořizuje záznam v Full HD rozlišení (1920 × 1080 pixelů). Díky režimu nočního snímání s dosahem 15 metrů kamera navíc pořizuje stejně kvalitní obraz i v noci.

Vodotěsný
Tato IP kamera opatřená mimořádně odolným pouzdrem s ochranou proti vniknutí vody obsahuje velkorysou interní paměť o velikosti 16 GB.

Křišťálová čistota
Kamera nahrává Full HD videa a obrazy o velikosti 1920 × 1080 pixelů pomocí 1/3" CMOS senzoru pro křišťálově čisté rozlišení a spouští se po detekci zvuku či pohybu.

Obousměrná komunikace
Pomocí kamery je možné komunikovat díky aktivnímu obousměrnému mluvení i poslechu - což znamená, že pokud jsou v dosahu lidé, lze ji použít podobným způsobem jako telefon.

Snadná instalace
S jednotkou se dodává nástěnný držák a stručná příručka, která zajistí že vše nainstalujete během okamžiku.
Informace o zařízení Nedis SmartLife
Objevte širokou a neustále se rozvíjející škálu produktů - například žárovky, spínače, zástrčky, senzory a kamery - které lze ovládat prostřednictvím intuitivní a jednoduché aplikace.
Ať již sháníte jednoduchou chytrou žárovku nebo zástrčku nebo chcete automatizovat celý dům, začněte objevovat, jak je v současné době chytrá technologie dostupná.

Balení

Obsah balení

IP camera
Power adapter
Camera mount
Adhesive pad
Quick start guide

Rozměry maloobchodního balení Dárková krabice s eurozávesem

Šířka Výška Délka
95 mm 95 mm 195 mm

Logistické rozměry

Balení Šířka Výška Délka Hmotnost
1 95 mm 100 mm 195 mm 458 g
20 215 mm 480 mm 400 mm 9720 g

Specifikace produktu

Šířka 75 mm
Výška 105 mm
Hloubka 75 mm
Hmotnost 350 g
Barva Bílá
Vestavěný mikrofon Ano
Vstupní proud 1.0 A
Typ zdroje napájení Síťové napájení
Materiál Plast
Zástrčka Euro / Typ C (CEE 7/16)
Funkce záznamu v cloudu Ano
Integrované reproduktory Ano
Kompatibilní s Nedis® SmartLife
Úhel záběru 110 °
Obrazový čip 1/3" CMOS
LED 1
Příslušenství Držák Kamery
AC Adaptér EU Zástrčka
IP krytí IP65
Délka kabelu napájecího adaptéru 1.50 m
Maximální vysílací výkon 15 dBm
Noční vidění 15 m
Maximální zisk antény 3 dBi
Infračervené noční vidění Ano
Objektiv 2.8 mm
Snímků za sekundu 25 fps
Typ skladování Interní 16 GB
Cloudové Úložiště (volitelně)
Vstupní napájecí konektor(y) DC 5,5 x 2,1 mm
Maximální spotřeba energie 12 W
Maximální rozlišení Full HD 1080p
Úhel náklonu 85 °
Megapixel 2 MPixel
Stupně natočení 355 °
Provedení kamery PTZ Kamera
Podpora napájení přes ethernet Ne
Rybí oko Ne
Se snímačem pohybu Ano
Aplikace ke stažení pro Android™
IOS
Vysílací frekvenční rozsah 2400 - 2483.5 MHz
Vstupní napětí 12 V DC
Náklon Ano
Stmívatelné Ano
Podporovaná bezdrátová technologie Wi-Fi
Programovatelné Ano
Rozsah provozních teplot -20 - 50 °C
Počet produktů v balení 1 kusů

Podpora

Často kladené otázky

Našli jsme vám následující dotazy v angličtině

The record function in the app is used to save the recording of the camera at your phone.
So you can store an event manually at your phone.

You go to play in the app, here you see the time line. Select the time that an event accursed, click on record and again at record and the recording will be saved at your phone.

It is not possible to extend the internal memory by an SD-Card.
You can extend the recordings with the cloud storage.

See for instructions the FAQ "Does the camera support cloud storage?"

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

24 hours of recording takes up about 6.5GB on the memory.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

You can add maximum 20 members.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.